FRONT BUMPER INSTALLATION


  1. INSTALL FRONT BUMPER ASSEMBLY


    1. Connect the headlight cleaner hose.

    2. Connect each connector.

    3. A01EJLZ

      Engage the 4 claws to install the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Install the clip.

    5. Install the 2 bolts and 8 screws.

    6. A01EL65E01
      Text in Illustration
      *1 Correct
      *2 Incorrect

      Install the 2 pin hold clips.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL RADIATOR GRILLE


    1. Engage the 6 claws.

    2. Install the 3 clips.

    3. Install the radiator grille with the 2 bolts.

  3. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 12 clips.

  4. ADJUST FOG LIGHT ASSEMBLY

    Click here

  5. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.