FRONT BUMPER REMOVAL


  1. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01ELBH

      Using a clip remover, remove the 12 clips and cool air intake duct seal.

  2. REMOVE RADIATOR GRILLE


    1. A01EM2EE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille.

    2. A01EKM4

      Remove the 2 bolts.

    3. A01EL50

      Using a clip remover, remove the 3 clips.

    4. Disengage the 6 claws and remove the radiator grille.

  3. REMOVE FRONT BUMPER ASSEMBLY


    1. A01EIOFE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

    2. A01EJ5W

      Remove the 2 bolts and 6 screws.

    3. Using a clip remover, remove the clip.

    4. A01EL5Q

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01ELHX

      Using a screwdriver, turn the 2 pins 90 degrees and remove the 2 pin hold clips.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01EJED

      Disengage the 4 claws and remove the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. Disconnect each connector.

    8. Disconnect the headlight cleaner hose and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

    9. A01EJQO

      Remove the front bumper assembly as shown in the illustration.