STOP LIGHT SWITCH INSPECTION


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY


    1. Measure the resistance according to the value(s) in the table below.

      A01EKFOE01
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed 10 kΩ or higher
      Not pushed Below 1 Ω
      3 - 4 Pushed Below 1 Ω
      Not pushed 10 kΩ or higher
      Text in Illustration
      *1

      Component without harness connected

      (Stop Light Switch Assembly)

      If the result is not as specified, replace the stop light switch assembly.