HAZARD WARNING SWITCH INSTALLATION


  1. INSTALL DRIVE MONITOR SWITCH


    1. A01EKMG

      Engage the 4 claws to install the driver monitor switch.

  2. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)


    1. Connect each connector.

    2. Engage the 2 clips.

    3. Install the radio and display receiver assembly with bracket with the 4 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

  3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)


    1. Connect each connector.

    2. Engage the 2 clips.

    3. Install the navigation receiver assembly with bracket with the 4 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

  4. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A01EM7F

      Engage the 4 guides and 9 claws to install the No. 2 instrument panel speaker panel sub-assembly.

  5. INSTALL CONSOLE BOX SUB-ASSEMBLY


    1. A01ELB3

      Engage the 2 claws and 4 clips.

    2. A01EK7A

      Engage the 2 clamps.

    3. Connect the connector.

    4. Install the clip.

    5. Install the console box sub-assembly with the 2 screws <E> or <F>.

  6. INSTALL POSITION INDICATOR HOUSING ASSEMBLY


    1. A01ELXD

      Engage the 3 clips to position indicator housing assembly.

    2. Connect the connector.

    3. Move the shift lever to P.

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01EJGU

      Turn the shift lever knob clockwise to install the shift lever knob sub-assembly.

  8. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A01EIMR

      Connect the connectors.

    2. Engage the 5 guides, 2 clips and claw.

    3. A01EJR6

      Install the lower instrument panel sub-assembly with the bolt <C> and 4 screws <E> or <F>.

  9. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01ELH3

      Engage the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.

  10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  11. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  12. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EJS4

      Connect the hood lock control cable.

    2. A01EITG

      Connect the aspirator duct and connector.

    3. A01EKDA

      Connect the connectors.

    4. Engage the claw and 9 clips.

    5. Install the lower No. 1 instrument panel finish panel with the bolt <C> and screw <E> or <F>.

  13. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01EJEA

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  14. INSTALL FRONT DOOR SCUFF PLATE LH


    1. A01ELE9

      Engage the guide, 3 clips and the 7 claws to install the front door scuff plate LH.

  15. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect the connector.

    2. A01EITTE01

      Engage the 2 clips and 4 guides.

    3. Remove the protective tape.

      Text in Illustration
      *1 Protective Tape
    4. A01EK00

      Install the air conditioning control assembly with the screw.

  16. INSTALL CONSOLE BOX ASSEMBLY


    1. A01EJXQ

      Connect the connectors.

    2. Engage the 2 claws.

    3. A01EKCR

      Install the screw and 2 clips.

    4. A01EKRE

      Install the console box assembly with the 2 bolts.

  17. INSTALL NO. 2 CONSOLE BOX CARPET


    1. A01EKN6

      Install the No. 2 console box carpet.

  18. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01EJBME01

      Connect the connectors.

    2. Engage the 6 clips to install the upper console panel sub-assembly as shown in the illustration.