HAZARD WARNING SWITCH INSPECTION


  1. INSPECT DRIVE MONITOR SWITCH


    1. A01EJDLE05
      Text in Illustration
      *1

      Component without harness connected

      (Drive Monitor Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (F) - 3 (E) Hazard warning switch off 10 kΩ or higher
      Hazard warning switch on Below 1 Ω

      If the result is not as specified, replace the driver monitor switch.