HEADLIGHT DIMMER SWITCH INSPECTION


  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. A01EML1E96
      Text in Illustration
      *1

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Light Control Switch
      Tester Connection Switch Condition Specified Condition
      18 (T) - 12 (EL) Light control switch off 10 kΩ or higher
      19 (A) - 12 (EL) Light control switch off 10 kΩ or higher
      20 (H) - 12 (EL) Light control switch off 10 kΩ or higher
      18 (T) - 12 (EL) Light control switch in tail position Below 1 Ω
      18 (T) - 12 (EL) Light control switch in head position Below 1 Ω
      20 (H) - 12 (EL) Light control switch in head position Below 1 Ω
      19 (A) - 12 (EL) Light control switch in auto position Below 1 Ω
      Dimmer Switch
      Tester Connection Switch Condition Specified Condition
      11 (HU) - 12 (EL) Dimmer switch in high position Below 1 Ω
      12 (EL) - 11 (HU) Dimmer switch in high flasher position Below 1 Ω
      12 (EL) - 17 (HF) Below 1 Ω
      Turn Signal Switch
      Tester Connection Switch Condition Specified Condition
      12 (EL) - 13 (TR) Right turn Below 1 Ω
      12 (EL) - 13 (TR) Neutral 10 kΩ or higher
      12 (EL) - 15 (TL) Neutral 10 kΩ or higher
      12 (EL) - 15 (TL) Left turn Below 1 Ω
      Fog Light Switch
      Tester Connection Switch Condition Specified Condition
      3 (LFG) - 4 (BFG) Fog light switch off 10 kΩ or higher
      3 (LFG) - 4 (BFG) Fog light switch in front position Below 1 Ω
      3 (LFG) - 2 (RF) Fog light switch off 10 kΩ or higher
      3 (LFG) - 2 (RF) Fog light switch in rear position Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.