Tech Tips
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
REMOVE OUTER MIRROR
| *1 | Protective Tape |
Push the lower part of the outer mirror surface and tilt it.
Apply protective tape as shown in the illustration.
Using a clip remover, disengage the 2 claws at the upper part of the outer mirror.
Disengage the 2 claws and disconnect the outer mirror as shown in the illustration.
Disconnect the 2 connectors and remove the outer mirror.
REMOVE OUTER MIRROR LIGHT ASSEMBLY
Disengage the 2 claws and guide from the outer rear view mirror assembly.
Disconnect the connector and remove the outer mirror light assembly.