SIDE MUDGUARD INSTALLATION

Tech Tips

When installing the mouldings, heat the vehicle body and mouldings using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Emblem, Name Plate 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body or mouldings excessively.


  1. INSTALL REAR ROCKER PANEL MOULDING END COVER


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01EKCEE01

      Clean the rear rocker panel moulding end cover.

      Dimension Measurement
      A 1.2 mm (0.0472 in.)
      B 6.0 mm (0.236 in.)

      1. Using a heat light, heat the rear rocker panel moulding end cover.

      2. Remove the double-sided tape from the rear rocker panel moulding end cover.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the rear rocker panel moulding end cover.

    3. Install the 2 grommets to the rear rocker panel moulding end cover.

    4. A01EK3X

      Install the rear rocker panel moulding end cover.


      1. Using a heat light, heat the vehicle body and rear rocker panel moulding end cover.

      2. Remove the release paper from the rear rocker panel moulding end cover.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the rear rocker panel moulding end cover with the 2 screws and clip.

  2. INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR


    1. A01EKNPE01

      Install the No. 2 rocker panel moulding protector with the 2 screws <B>.

    2. Install the screw <A>.

  3. INSTALL REAR DOOR OUTSIDE MOULDING


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01EIVPE01

      Clean the rear door outside moulding.

      Dimension Measurement
      A 1.2 mm (0.0472 in.)
      B 6.0 mm (0.236 in.)

      1. Using a heat light, heat the rear door outside moulding.

      2. Remove the double-sided tape from the rear door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the rear door outside moulding.

    3. Install 9 new clips (No. 1 outside moulding clip) to the rear door outside moulding.

    4. Install the outside moulding retainer to the rear door outside moulding.

    5. A01EKW6

      Install the rear door outside moulding.


      1. Using a heat light, heat the vehicle body and rear door outside moulding.

      2. Remove the release paper from the rear door outside moulding.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 9 clips and install the rear door outside moulding.

    6. A01EIXV

      Install the nut and hole plug.

  4. INSTALL FRONT DOOR OUTSIDE MOULDING


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01EJPCE01

      Clean the front door outside moulding.

      Dimension Measurement
      A 1.2 mm (0.0472 in.)
      B 6.0 mm (0.236 in.)

      1. Using a heat light, heat the front door outside moulding.

      2. Remove the double-sided tape from the front door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the front door outside moulding.

    3. Install 13 new clips (No. 1 outside moulding clip) to the front door outside moulding.

    4. Install the outside moulding retainer to the front door outside moulding.

    5. A01EJIS

      Install the front door outside moulding.


      1. Using a heat light, heat the vehicle body and front door outside moulding.

      2. Remove the release paper from the front door outside moulding.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 13 clips and install the front door outside moulding.

    6. A01EK16

      Install the nut and hole plug.

  5. INSTALL FRONT FENDER OUTSIDE MOULDING


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01EM6JE01

      Clean the front fender outside moulding.

      Dimension Measurement
      A 1.2 mm (0.0472 in.)
      B 6.0 mm (0.236 in.)

      1. Using a heat light, heat the front fender outside moulding.

      2. Remove the double-sided tape from the front fender outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the front fender outside moulding.

    3. Install 2 new clips (No. 1 outside moulding clip) to the front fender outside moulding.

    4. A01EJ2F

      Install the front fender outside moulding.


      1. Using a heat light, heat the vehicle body and front fender outside moulding.

      2. Remove the release paper from the front fender outside moulding.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 2 clips and install the front fender outside moulding.

    5. Install the screw.