NAME PLATE INSTALLATION

Tech Tips

When installing new name plates and emblem, heat the vehicle body, name plates and emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Emblem, Name Plate 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.


  1. INSTALL NO. 1 BACK DOOR EMBLEM


    1. A01EKIME01
      Text in Illustration
      *1 Protective Tape

      Install the No. 1 back door emblem with the guide and 2 claws.

      Note

      Be careful not to damage the vehicle body.

  2. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 2 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate as shown in the illustration.

        A01ELL1E01
        Text in Illustration
        *1 Location Pin - -

  3. INSTALL NO. 3 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 3 back door name plate.


      1. Using a heat light, heat the vehicle body and the new No. 3 back door name plate.

      2. Remove the release paper from the No. 3 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 3 back door name plate as shown in the illustration.

        A01EJSUE01
        Standard Measurement
        Dimension Measurement
        A 41.6 mm (1.6378 in.)
        B 52.3 mm (2.0591 in.)
        C 37.6 mm (1.4803 in.)

  4. INSTALL HOOD EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new hood emblem.


      1. Using a heat light, heat the vehicle body and the hood emblem.

      2. Remove the release paper from the hood emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the hood emblem as shown in the illustration.

        A01EM1RE01
        Text in Illustration
        *1 Location Pin - -