SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE OUTER MIRROR


    1. A01ELMCE01
      Text in Illustration
      *1 Protective Tape

      Push the lower part of the outer mirror surface and tilt it.

    2. Apply protective tape as shown in the illustration.

    3. A01EM75

      Using a clip remover, disengage the 2 claws at the upper part of the outer mirror.

    4. A01EKTRE01

      Disengage the 2 claws and disconnect the outer mirror as shown in the illustration.

    5. A01EM7I

      Disconnect the 2 connectors and remove the outer mirror.

  2. REMOVE OUTER MIRROR COVER


    1. A01EKMQ

      Disengage the 6 claws.

    2. A01EKQX

      Disengage the claw and remove the outer mirror cover as shown in the illustration.

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A01ELQJ

      Remove the screw.

    2. Disengage the 2 claws.

    3. Disconnect the connector and remove the side turn signal light assembly.