HEADLIGHT ASSEMBLY INSTALLATION


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Install the headlight assembly with the bolt and 3 screws.

      Torque:
      3.6 N*m  { 37 kgf*cm, 32 in.*lbf }

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. ADJUST HEADLIGHT AIMING

    Click here

  5. ADJUST FOG LIGHT AIMING

    Click here