LIGHTING SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA


    1. Whenever a DTC is detected, the AFS ECU (headlight swivel ECU assembly) stores the current vehicle (sensor) state as Freeze Frame Data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / AFS / Trouble Codes.

    5. According to the display on the GTS, select the trouble code data display with Freeze Frame Data.

      AFS
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      +B IG power supply voltage value/0 to 19.75 V 11 to 14 V -
      Steering Sens Signal Steering angle sensor signal value/-384° to 382.5° Value is output according to steering wheel position -
      FR Wheel Speed Front right wheel speed/0 to 327.67 km/h Condition can be displayed -

  3. CLEAR FREEZE FRAME DATA

    Note

    Clearing the DTC will also clear the Freeze Frame Data.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Clear the DTC and Freeze Frame Data Click here.