HEADLIGHT CLEANER SWITCH INSPECTION


  1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY


    1. A01EM06E32
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Cleaner Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (L) - 4 (B) Headlight cleaner switch on Below 1 Ω
      Headlight cleaner switch off 10 kΩ or higher

    2. Connect a battery positive (+) lead to terminal 3 (ILL+) and a negative (-) lead to terminal 2 (ILL-).

    3. Check that the headlight cleaner switch assembly illumination comes on.

      OK
      The headlight cleaner switch assembly illumination comes on.

      If the result is not as specified, replace the headlight cleaner switch assembly.