WASHER LEVEL WARNING SWITCH REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT FENDER OUTSIDE MOULDING RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  3. REMOVE FRONT FENDER LINER RH


    1. A01EL7JE01
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.

    2. A01ELNJE01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

      Remove the 5 clips <A>.

    3. Remove the clip <B>.

    4. A01EKDW

      Remove the bolt and 6 screws.

    5. Remove the grommet and front fender liner RH.

      Tech Tips

      The grommet need to be replaced with new ones because they will break when they are removed.

  4. DRAIN WASHER FLUID


    1. A01EKG1

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE WASHER LEVEL WARNING SWITCH ASSEMBLY


    1. A01EIR7

      Disconnect the connector.

    2. Remove the washer level warning switch assembly.