WASHER MOTOR (for Front Side) INSTALLATION


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01EKN8

      Install the windshield washer motor and pump assembly.

    2. Connect the connector.

    3. Connect the washer hose.

  2. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. Install the front fender liner RH with a new grommet.

    2. Install the 5 clips <A>.

    3. Install the clip <B>.

    4. Install the bolt and 6 screws.

    5. A01EJ8BE01
      Text in Illustration
      *1 Correct
      *2 Incorrect

      Install the 2 pin hold clips.

      Note

      Insert the pin hold with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. INSTALL FRONT FENDER OUTSIDE MOULDING RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  5. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }