REAR WIPER MOTOR INSPECTION


  1. INSPECT REAR WIPER MOTOR AND BRACKET ASSEMBLY

    A01EITLE05
    Text in Illustration
    *a

    Component without harness connected

    (Rear Wiper Motor and Bracket Assembly)

    1. Check the wiper low operation.


      1. Connect a battery positive (+) lead to terminal 4 (+B), and a negative (-) lead to terminal 3 (LS) and terminal 5 (E), and check that the motor operates.

        OK
        Motor operates.

        If the result is not as specified, replace the rear wiper motor and bracket assembly.

    2. Check the intermittent operation.


      1. Connect a battery positive (+) lead to terminal 4 (+B), and a negative (-) lead to terminal 2 (C1) and terminal 5 (E), and check that the motor operates.

        OK
        Motor operates.

        If the result is not as specified, replace the rear wiper motor and bracket assembly.