FRONT WIPER MOTOR INSTALLATION


  1. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A01ELFJ

      Using a T30 "TORX" socket wrench, install the windshield wiper motor assembly with the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Apply MP grease to the crank arm pivot of the windshield wiper motor assembly.

    3. A01EJKZ

      Install the windshield wiper link rod to the crank arm pivot of the windshield wiper motor assembly.

  2. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. A01EJ0O

      Install the windshield wiper motor and link assembly with the 3 bolts as shown in the illustration.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }
    2. A01EIMEE01

      Connect the connector.

  3. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A01ELR9

      Engage the 13 claws and install the cowl top ventilator louver sub-assembly as shown in the illustration.

    2. A01ELGA

      Install the 2 clips.

  4. INSTALL FRONT FENDER TO COWL SIDE SEAL LH


    1. A01EKVY

      Engage the claw and 2 guides to install the front fender to cowl side seal LH.

  5. INSTALL FRONT FENDER TO COWL SIDE SEAL RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  6. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. Operate the wiper and stop the windshield wiper motor at the automatic stop position.

    2. When reusing the front wiper arm and blade assembly RH:


      1. A01EJK9E02
        Text in Illustration
        *1 Wiper Arm Serration

        Clean the wiper arm serrations.

    3. When reusing the windshield wiper link assembly:


      1. A01ELCGE02
        Text in Illustration
        *1 Wire Brush
        *2 Wiper Pivot Serration

        Clean the wiper pivot serrations with a wire brush.

    4. A01EMJQE02
      Text in Illustration
      *1 Ceramic Notch

      Install the front wiper arm and blade assembly RH with the nut to the position shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. When reusing the front wiper arm and blade assembly LH:


      1. A01EJK9E04
        Text in Illustration
        *1 Wiper Arm Serration

        Clean the wiper arm serrations.

    2. When reusing the windshield wiper link assembly:


      1. A01ELCGE03
        Text in Illustration
        *1 Wire Brush
        *2 Wiper Pivot Serration

        Clean the wiper pivot serrations with a wire brush.

    3. A01EKJDE02
      Text in Illustration
      *1 Ceramic Notch

      Install the front wiper arm and blade assembly LH with the nut to the position shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    4. Operate the front wipers while spraying washer fluid onto the windshield. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.

  8. INSTALL FRONT WIPER ARM HEAD CAP


    1. A01EJBP

      Install the 2 front wiper arm head caps.