FRONT WIPER MOTOR REMOVAL


  1. REMOVE FRONT WIPER ARM HEAD CAP


    1. A01ELEUE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the 2 front wiper arm head caps as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. A01EMRZ

      Remove the nut and the front wiper arm and blade assembly LH.

  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. A01EK79

      Remove the nut and the front wiper arm and blade assembly RH.

  4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH


    1. A01EKVY

      Disengage the claw and 2 guides and remove the front fender to cowl side seal LH.

  5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A01ELGA

      Using a clip remover, remove the 2 clips.

    2. A01ELW9

      Disengage the 13 claws and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.

  7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. A01EIMEE01

      Disconnect the connector.

    2. A01ELYY

      Remove the 3 bolts and the windshield wiper motor and link assembly as shown in the illustration.

  8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A01ELR6E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the windshield wiper link rod from the crank arm pivot of the front wiper motor assembly as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01ELFJ

      Using a T30 "TORX" socket wrench, remove the 2 bolts and the windshield wiper motor assembly from the windshield wiper link assembly.