POWER BACK DOOR CONTROL SWITCH REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A01ELE9

      Disengage the 3 clips, 7 claws and guide, and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01EJEA

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EKDA

      Remove the bolt <C> and screw <E> or <F>.

    2. Disengage the claw and 9 clips.

    3. Disconnect the connectors.

    4. A01EITG

      Disconnect the connector and aspirator duct.

    5. A01EJS4

      Disconnect the hood lock control cable and remove the lower No. 1 instrument panel finish panel.

  4. REMOVE BACK DOOR CONTROL SWITCH


    1. A01ELHG

      Disengage the 2 claws and remove the back door control switch.