POWER BACK DOOR MAIN SWITCH INSTALLATION


  1. INSTALL POWER BACK DOOR MAIN SWITCH


    1. A01EKC7

      Engage the 2 claws and install the power back door main switch.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EJS4

      Connect the hood lock control cable.

    2. A01EITG

      Connect the aspirator duct and connector.

    3. A01EKDA

      Connect the connectors.

    4. Engage the claw and 9 clips.

    5. Install the lower No. 1 instrument panel finish panel with the bolt <C> and screw <E> or <F>.

  3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01EJEA

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  4. INSTALL FRONT DOOR SCUFF PLATE LH


    1. A01ELE9

      Engage the guide, 3 clips and the 7 claws to install the front door scuff plate LH.