BACK DOOR OPENER SWITCH INSTALLATION


  1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY


    1. A01EK7C

      Install the back door opener switch assembly.

  2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. Install the 5 stud bolts and 5 new gaskets to the back door outside garnish sub-assembly.

    2. Install 16 new clips (back door moulding clip) to the back door outside garnish sub-assembly.

    3. A01EL3R

      Engage the 16 clips to install the back door outside garnish sub-assembly.

    4. A01EL15

      Install the 5 nuts.

    5. Connect each connector.

  3. INSTALL REAR LIGHT ASSEMBLY LH


    1. A01EISE

      Engage the 2 pins to install the rear light assembly.

    2. A01EJKY

      Install the 2 nuts.

      Torque:
      6.8 N*m  { 69 kgf*cm, 60 in.*lbf }

    3. Connect the 2 connectors.

  4. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  5. INSTALL BACK DOOR PANEL TRIM ASSEMBLY


    1. A01EJ5Z

      Engage the 16 clips and install the back door panel trim assembly.