HOOD ON-VEHICLE INSPECTION


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas *1 through *4 are within each standard range.

      A01EIQXE01
      Standard Clearance
      Area Measurement Area Measurement
      *1 6.9 to 9.9 mm (0.272 to 0.390 in.) *3 2.8 to 5.8 mm (0.110 to 0.228 in.)
      *2 7.6 to 10.6 mm (0.299 to 0.417 in.) *4 -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)