POWER WINDOW MASTER SWITCH INSPECTION


  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    1. A01EM96E05
      Text in Illustration
      *1

      Component without harness connected

      (to Power Window Regulator Master Switch Assembly)

      Check that the LED illuminates.


      1. Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 18 (LED)

        Battery negative (-) → 12 (E)

        		 LED illuminates

        If the result is not as specified, replace the power window regulator master switch assembly.