ROOF HEADLINING DISASSEMBLY


  1. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Peel up the strips of tape so that the washer hose and No. 2 antenna cord sub-assembly can be removed.

      A01EJ2SE01
      Text in Illustration
      A01EKJB Tape A01EMIT Front

      Tech Tips

      Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

    2. Remove the washer hose and No. 2 antenna cord sub-assembly from the roof headlining assembly.

  2. REMOVE VANITY LIGHT ASSEMBLY


    1. Remove the vanity light assembly Click here.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  3. REMOVE NO. 1 ROOF WIRE


    1. Remove the adhesive tape.

    2. Turn the visor connectors counterclockwise approximately 90° and separate the connectors.

    3. Remove the No. 1 roof wire.

      A01EJI8E01
      Text in Illustration
      *1 Adhesive Tape - -

  4. REMOVE NO. 14 ROOF SILENCER PAD


    1. Remove the No. 14 roof silencer pad.

      A01EM4B