AIR CONDITIONING PANEL REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01EJVQE01

      Pull the upper console panel sub-assembly in the direction indicated by the arrow to disengage the 6 clips.

    2. Disconnect the connectors and remove the upper console panel sub-assembly.

  3. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A01EK00

      Remove the screw.

    2. A01ELRWE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    3. Using a moulding remover, disengage the 2 clips and 4 guides as shown in the illustration.

    4. Disconnect the connector and remove the air conditioning control assembly.