AMBIENT TEMPERATURE SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01ELBH

      Using a clip remover, remove the 12 clips and cool air intake duct seal.

  3. REMOVE RADIATOR GRILLE


    1. A01EM2EE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille.

    2. A01EKM4

      Remove the 2 bolts.

    3. A01EL50

      Using a clip remover, remove the 3 clips.

    4. Disengage the 6 claws and remove the radiator grille.

  4. REMOVE AMBIENT TEMPERATURE SENSOR


    1. A01ELHD

      Disconnect the connector.

    2. Disengage the clamp to remove the ambient temperature sensor.