POWER WINDOW CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH GTS (REFERENCE)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Customize.

    5. Select the setting by referring to the table below.

      Power Window
      Tester Display Default Content Setting
      P Window Auto Up Avail This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side). Avail or Not Avl
      P Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch. Avail or Not Avl
      RR Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH. Avail or Not Avl
      RR Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch. Avail or Not Avl
      RL Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH. Avail or Not Avl
      RL Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch. Avail or Not Avl