BLOWER UNIT REMOVAL


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  2. REMOVE NO. 1 FINISH PANEL MOUNTING BRACKET


    1. A01EKSI

      Remove the 2 bolts and 2 No. 1 finish panel mounting brackets as shown in the illustration.

  3. REMOVE NO. 2 FINISH PANEL MOUNTING BRACKET


    1. A01EMM8

      Remove the bolt and No. 2 finish panel mounting bracket as shown in the illustration.

  4. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY


    1. A01EJZB

      Disengage the 2 claws and guide, and remove the No. 3 air duct sub-assembly as shown in the illustration.

  5. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY


    1. A01EK8W

      Disengage the 2 claws and guide, and remove the No. 2 air duct sub-assembly as shown in the illustration.

  6. REMOVE AIR CONDITIONING HARNESS ASSEMBLY


    1. Disconnect each connector.

      A01EJTP

    2. Disengage each clamp and remove the air conditioning harness assembly.

  7. REMOVE COOLER EXPANSION VALVE


    1. A01EKVK

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.

  8. REMOVE BLOWER ASSEMBLY WITH COOLER EVAPORATOR SUB-ASSEMBLY


    1. A01ELOL

      Remove the 6 screws.

    2. A01EIZB

      Disengage the guide and disconnect the wire harness.

    3. Disengage the 5 claws and remove the blower assembly with cooler evaporator sub-assembly from the air conditioning radiator assembly.

  9. REMOVE COOLER EVAPORATOR SUB-ASSEMBLY


    1. A01EKLO

      Disengage the clamp and remove the cooler evaporator sub-assembly with the No. 1 cooler thermistor.

    2. A01ELWH

      Remove the 2 O-rings from the cooler evaporator sub-assembly.

  10. REMOVE NO. 1 COOLER THERMISTOR


    1. A01ELAH

      Remove the No. 1 cooler thermistor.