REAR CENTER SEAT OUTER BELT ASSEMBLY INSTALLATION


  1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A01EK37

      Install the rear center seat outer belt assembly with the bolt and nut.

      Torque:
      Bolt
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }
      Nut
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL REAR SEATBACK COVER WITH PAD


    1. A01EJYRE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install 3 new hog rings.

      Note


      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.

    2. A01EMJ0E01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.

    3. A01EMAR

      Engage the hook to install the rear seat cushion cover with pad.

  3. INSTALL REAR SEAT CENTER HEADREST SUPPORT RH


    1. A01EM5W

      Engage the 2 claws to install the rear seat center headrest support RH.

  4. INSTALL REAR SEAT CENTER HEADREST SUPPORT LH


    1. A01EL2O

      Engage the 2 claws to install the rear seat center headrest support LH.

  5. INSTALL REAR SEAT HEADREST SUPPORT RH


    1. A01EIVG

      Engage the 2 claws to install the rear seat headrest support RH.

  6. INSTALL REAR SEAT HEADREST SUPPORT LH


    1. A01ELLK

      Engage the 2 claws to install the rear seat headrest support LH.

  7. INSTALL REAR SEAT SHOULDER BELT COVER


    1. A01EJM3

      Engage the 2 guides and claw, and install the rear seat shoulder cover as shown in the illustration.

    2. A01EKFP

      Engage the 2 guides as shown in the illustration.

    3. A01EK8K

      Connect the rear seatback upper lock bezel with the screw.

  8. INSTALL REAR SEATBACK BOARD RH


    1. A01EKV1

      Engage the 3 guides and 4 clips as shown in the illustration.

    2. A01EIOX

      Engage the 20 claws and install the rear seatback board RH.

  9. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A01EM65E01
      Text in Illustration
      *1 Protruding Part

      Connect the rear center seat outer belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  10. INSTALL REAR SEAT CUSHION COVER WITH PAD


    1. A01EITC

      Engage each hook as shown in the illustration.

    2. A01EJF6

      Engage the 4 hooks.

    3. A01EMKSE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the rear seat cushion cover with pad with a new hog ring.

      Note


      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seat cushion cover.

    4. A01EM1Z

      Engage the hook to install the rear seat cushion with pad.

  11. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY


    1. A01EKAQ

      Install the 3 nuts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    2. A01EJ29

      Engage the hook and install the rear seat center armrest assembly.

  12. INSTALL REAR SEAT RECLINING COVER RH


    1. A01EISF

      Engage the 2 guides.

    2. Install the rear seat reclining cover RH with the 2 screws.

  13. INSTALL CENTER SEAT HINGE COVER RH


    1. A01EL17

      Disengage the guide as shown in the illustration.

    2. Install the center seat hinge cover RH with the 2 screws.

  14. INSTALL REAR SEAT INNER RECLINING COVER RH


    1. A01EM1N

      Engage the guide.

    2. Install the rear seat inner reclining cover RH with the 2 screws.

  15. INSTALL REAR SEAT RECLINING RELEASE LEVER RH


    1. A01EMH0

      Install the rear seat reclining release lever RH with the 3 screws.

  16. INSTALL SEAT ADJUSTER COVER CAP RH


    1. A01EJ1P

      Engage the 3 claws to install the seat adjuster cover cap RH.

  17. INSTALL REAR SEAT ASSEMBLY RH


    1. Place the rear seat assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01EMC9

      Temporarily install the 2 bolts on the front side of the seat.

    3. A01EMPM

      Temporarily install the 3 bolts on the rear side of the seat.

    4. Install the rear seat assembly RH with the 5 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  18. INSTALL REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY


    1. Connect the rear seat reclining control cable as shown in the illustration.

      A01EIO3

    2. Connect the rear seat reclining control cable sub-assembly as shown in the illustration.

      A01EJ2JE01
      Text in Illustration
      *1 Protective Tape *2 Seat Track Adjusting Handle
    3. A01EJK3

      Engage the 2 claws and connect the rear seat reclining control cable sub-assembly as shown in the illustration.

    4. Return the seatback to the upright position.

    5. Pull up the adjuster's lock piece to lock it as shown in the illustration.

      A01EM2BE01
      Text in Illustration
      *1 Adjuster Spring *2 Lock Piece

      Note

      When pressing the lock piece, make sure the adjuster's spring is not compressed.

  19. INSTALL REAR SEAT OUTER TRACK BRACKET COVER


    1. A01EKPX

      Engage the 3 claws and guide, and install the rear seat outer track bracket cover as shown in the illustration.

  20. INSTALL REAR SEAT INNER TRACK BRACKET COVER


    1. A01EJ0A

      Engage the 3 claws and guide, and install the rear seat inner track bracket cover as shown in the illustration.

  21. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

  22. INSTALL REAR SEAT HEADREST ASSEMBLY