CONDENSER REASSEMBLY


  1. INSTALL COOLER DRYER


    1. A01EJ6O

      Using pliers, install a new cooler dryer to the modulator.

    2. A01EJYT

      Apply sufficient compressor oil to the O-ring and fitting surfaces of the cap.

      Compressor oil
      ND-OIL 8 or equivalent
    3. A01EKGOE01
      Text in Illustration
      *1 14 mm Straight Hexagon Wrench
      *2 Modulator

      Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.

      Note

      Keep the O-rings and O-ring fitting surfaces clean from dirt or any foreign objects.

      Torque:
      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }