REMOVE REAR SEAT HEADREST ASSEMBLY
REMOVE REAR SEAT CENTER HEADREST ASSEMBLY
REMOVE REAR SEAT INNER TRACK BRACKET COVER
Disengage the 3 claws and guide, and remove the rear seat inner track bracket cover as shown in the illustration.
REMOVE REAR SEAT OUTER TRACK BRACKET COVER
Disengage the 3 claws and guide, and remove the rear seat outer track bracket cover as shown in the illustration.
DISCONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY
Pull down the adjuster's lock piece to release the lock as shown in the illustration.
| *1 | Adjuster Spring | *2 | Lock Piece |
| *1 | Protective Tape |
Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.
Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.
| *1 | Protective Tape | *2 | Seat Track Adjusting Handle |
Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable sub-assembly as shown in the illustration.
| *1 | Protective Tape | - | - |
REMOVE REAR SEAT ASSEMBLY RH
Remove the 3 bolts on the rear side of the seat.
Remove the 2 bolts on the front side of the rear seat assembly RH.
Remove the rear seat assembly RH.
Note
Be careful not to damage the vehicle body.
REMOVE SEAT ADJUSTER COVER CAP RH
| *1 | Protective Tape |
Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the seat adjuster cover cap RH.
REMOVE REAR SEAT RECLINING RELEASE LEVER RH
Remove the 3 screws and remove the rear seat reclining release lever RH.
REMOVE REAR SEAT RECLINING COVER RH
Remove the 2 screws.
Disengage the 2 guides and remove the rear seat reclining cover RH.
REMOVE CENTER SEAT HINGE COVER RH
Remove the 2 screws.
Disengage the guide and remove the center seat hinge cover RH as shown in the illustration.
REMOVE REAR SEAT INNER RECLINING COVER RH
Remove the 2 screws.
Disengage the guide and remove the rear seat inner reclining cover RH.
REMOVE REAR SEAT CENTER ARMREST ASSEMBLY
Disengage the hook.
Remove the 3 nuts and the rear seat center armrest assembly.
REMOVE REAR SEAT CUSHION COVER WITH PAD
Remove the hook.
Disengage the hog ring.
Disengage the 4 hooks.
Disengage each hook and remove the rear seat cushion cover with pad as shown in the illustration.
DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
Remove the bolt and disconnect the rear center seat outer belt assembly.
REMOVE REAR SEATBACK BOARD RH
Disengage the 20 claws.
Disengage the 4 clips and 3 guides, and remove the rear seatback board RH as shown in the illustration.
REMOVE REAR SEAT SHOULDER BELT COVER
Remove the screw.
Disengage the 2 guides and disconnect the rear seatback upper lock bezel as shown in the illustration.
Disengage the claw and 2 guides, and remove the rear seat shoulder belt cover as shown in the illustration.
REMOVE REAR SEAT HEADREST SUPPORT LH
Disengage the 2 claws and remove the rear seat headrest support LH.
REMOVE REAR SEAT HEADREST SUPPORT RH
Disengage the 2 claws and remove the rear seat headrest support RH.
REMOVE REAR SEAT CENTER HEADREST SUPPORT LH
Disengage the 2 claws and remove the rear seat center headrest support LH.
REMOVE REAR SEAT CENTER HEADREST SUPPORT RH
Disengage the 2 claws and remove the rear seat center headrest support RH.
REMOVE REAR SEATBACK COVER WITH PAD
Disengage the hook as shown in the illustration.
Disengage the 2 hog rings.
Remove the 3 hog rings and the rear seatback cover with pad.
REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY
Remove the bolt, nut, and the rear center seat outer belt assembly.