REAR CENTER SEAT INNER BELT ASSEMBLY REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT INNER TRACK BRACKET COVER


    1. A01ELIO

      Disengage the 3 claws and guide, and remove the rear seat inner track bracket cover as shown in the illustration.

  3. REMOVE REAR SEAT OUTER TRACK BRACKET COVER


    1. A01EJ71

      Disengage the 3 claws and guide, and remove the rear seat outer track bracket cover as shown in the illustration.

  4. DISCONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY


    1. Pull down the adjuster's lock piece to release the lock as shown in the illustration.

      A01EJREE01
      Text in Illustration
      *1 Adjuster Spring *2 Lock Piece
    2. A01EK1VE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.

    3. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

      A01EMQ8E01
      Text in Illustration
      *1 Seat Track Adjusting Handle *2 Protective Tap

    4. Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable sub-assembly as shown in the illustration.

      A01ELW1E01
      Text in Illustration
      *1 Protective Tape - -

    5. Secure the rear seat No. 2 reclining control cable sub-assembly with the carpet hole as shown in the illustration.

  5. REMOVE REAR SEAT ASSEMBLY LH


    1. A01ELFU

      Remove the 2 bolts on the rear side of the seat.

    2. A01EM4L

      Remove the 2 bolts on the front side of the seat.

    3. Remove the rear seat assembly LH.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY


    1. A01EKFL

      Remove the nut and the rear center seat inner belt assembly.