REAR SEAT INNER BELT ASSEMBLY (for RH Side) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  3. REMOVE REAR SEAT INNER TRACK BRACKET COVER


    1. A01EM8W

      Disengage the 3 claws and guide, and remove the rear seat inner track bracket cover as shown in the illustration.

  4. REMOVE REAR SEAT OUTER TRACK BRACKET COVER


    1. A01EKLF

      Disengage the 3 claws and guide, and remove the rear seat outer track bracket cover as shown in the illustration.

  5. DISCONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY


    1. Pull down the adjuster's lock piece to release the lock as shown in the illustration.

      A01EJOCE01
      Text in Illustration
      *1 Adjuster Spring *2 Lock Piece
    2. A01EKXEE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.

    3. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

      A01EK6GE01
      Text in Illustration
      *1 Protective Tape *2 Seat Track Adjusting Handle

    4. Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable sub-assembly as shown in the illustration.

      A01ELATE01
      Text in Illustration
      *1 Protective Tape - -

  6. REMOVE REAR SEAT ASSEMBLY RH


    1. A01EMPM

      Remove the 3 bolts on the rear side of the seat.

    2. A01EMC9

      Remove the 2 bolts on the front side of the rear seat assembly RH.

    3. Remove the rear seat assembly RH.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE SEAT ADJUSTER COVER CAP RH


    1. A01ELINE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the seat adjuster cover cap RH.

  8. REMOVE REAR SEAT RECLINING RELEASE LEVER RH


    1. A01EMH0

      Remove the 3 screws and remove the rear seat reclining release lever RH.

  9. REMOVE REAR SEAT RECLINING COVER RH


    1. A01EISF

      Remove the 2 screws.

    2. Disengage the 2 guides and remove the rear seat reclining cover RH.

  10. REMOVE CENTER SEAT HINGE COVER RH


    1. A01ELH6

      Remove the 2 screws.

    2. Disengage the guide and remove the center seat hinge cover RH as shown in the illustration.

  11. REMOVE REAR SEAT INNER RECLINING COVER RH


    1. A01EM1N

      Remove the 2 screws.

    2. Disengage the guide and remove the rear seat inner reclining cover RH.

  12. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. A01EJ29

      Disengage the hook.

    2. A01EKAQ

      Remove the 3 nuts and the rear seat center armrest assembly.

  13. REMOVE REAR SEAT CUSHION COVER WITH PAD


    1. A01EM1Z

      Remove the hook.

    2. A01EIU8

      Disengage the hog ring.

    3. A01EJF6

      Disengage the 4 hooks.

    4. A01EITC

      Disengage each hook and remove the rear seat cushion cover with pad as shown in the illustration.

  14. REMOVE REAR SEAT INNER BELT ASSEMBLY RH


    1. A01EM4A

      Remove the bolt and the rear seat inner belt assembly RH.