OCCUPANT CLASSIFICATION ECU INSTALLATION


  1. INSTALL OCCUPANT CLASSIFICATION ECU


    1. A01EKTT

      Install the occupant classification ECU with the claw.

      Note


      • If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant classification ECU with a new one.

      • When installing the occupant classification ECU, be careful that the SRS wiring does not interfere with or is pinched between other parts.

    2. Connect the connector.

  2. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side Click here.

  3. PERFORM DIAGNOSTIC SYSTEM CHECK


    1. Perform a diagnostic system check Click here.

  4. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK

    Click here