SEAT MEMORY SWITCH INSPECTION


  1. INSPECT SEAT MEMORY SWITCH


    1. A01EL9AE01
      Text in Illustration
      *1 M1 Switch
      *2 M2 Switch
      *3 SET Switch
      *a

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 SET switch is pressed Below 1 Ω
      SET switch is not pressed 10 kΩ or higher
      1 - 4 M1 switch is pressed Below 1 Ω
      M1 switch is not pressed 10 kΩ or higher
      1 - 3 M2 switch is pressed Below 1 Ω
      M2 switch is not pressed 10 kΩ or higher

      If the result is not as specified, replace the seat memory switch.