REAR SEAT ASSEMBLY (for RH Side) INSTALLATION


  1. INSTALL REAR SEAT ASSEMBLY RH


    1. Place the rear seat assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01EMC9

      Temporarily install the 2 bolts on the front side of the seat.

    3. A01EMPM

      Temporarily install the 3 bolts on the rear side of the seat.

    4. Install the rear seat assembly RH with the 5 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. CONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY


    1. Connect the rear seat reclining control cable as shown in the illustration.

      A01EIO3

    2. Connect the rear seat reclining control cable sub-assembly as shown in the illustration.

      A01EJ2JE01
      Text in Illustration
      *1 Protective Tape *2 Seat Track Adjusting Handle
    3. A01EJK3

      Engage the 2 claws and connect the rear seat reclining control cable sub-assembly as shown in the illustration.

    4. Return the seatback to the upright position.

    5. Pull up the adjuster's lock piece to lock it as shown in the illustration.

      A01EM2BE01
      Text in Illustration
      *1 Adjuster Spring *2 Lock Piece

      Note

      When pressing the lock piece, make sure the adjuster's spring is not compressed.

  3. INSTALL REAR SEAT OUTER TRACK BRACKET COVER


    1. A01EKPX

      Engage the 3 claws and guide, and install the rear seat outer track bracket cover as shown in the illustration.

  4. INSTALL REAR SEAT INNER TRACK BRACKET COVER


    1. A01EJ0A

      Engage the 3 claws and guide, and install the rear seat inner track bracket cover as shown in the illustration.

  5. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

  6. INSTALL REAR SEAT HEADREST ASSEMBLY