OCCUPANT CLASSIFICATION SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING THE BATTERY CABLE

    Note

    When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

    System Name See Procedure
    Back Door Closer System

    Click here

    Power Back Door System

  2. INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT


    1. Perform zero point calibration and sensitivity check if any of the following conditions occur:


      • The occupant classification ECU is replaced.

      • Accessories (seatback tray and seat cover, etc.) are installed.

      • The front passenger seat is removed from the vehicle.

      • The vehicle is brought to the workshop for repair due to an accident or a collision.

  3. EXPRESSIONS OF IGNITION SWITCH

    The type of ignition switch used on this model differs according to the specifications of the vehicle.

    The expressions listed in the table below are used in this section.

    Expression Switch Type
    Ignition Switch (Position) Engine Switch (Condition)
    Ignition switch off LOCK Off
    Ignition switch ON ON On (IG)
    Ignition switch ACC ACC On (ACC)
    Engine Start START Start