FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

CAUTION:

The nuts must not be reused.
Make sure that the front seat frame assembly with adjuster is not deformed. If it is, replace it with a new one.

INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY
1. Install the front seat side airbag assembly with 2 new nuts.
  
  Torque:
  
  8.0 N*m { 82 kgf*cm, 71 in.*lbf }
2. Engage the 2 clamps to connect the wire harness.
3. Engage the 4 clamps to connect the wire harness.
INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
1. Temporarily install the separate type front seatback cover with pad to the front seat frame assembly with adjuster.
2. Engage the 4 claws and install the 2 front seat headrest supports.
3. Using hog ring pliers, install 2 new hog rings.
  Note
  
  Be careful not to damage the separate type front seatback cover.
  
  Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
4. Using hog ring pliers, install 2 new hog rings.
  Note
  
  Be careful not to damage the separate type front seatback cover.
  
  Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
5. Engage the 4 hooks.
6. Text in Illustration
  
  *1 Bracket
  
  Engage the guide to install the bracket of the separate type front seatback cover with the nut.
  
  Torque:
  
  8.0 N*m { 82 kgf*cm, 71 in.*lbf }
  Note
  
  For vehicles with front seat side airbag assembly, the front seat side airbag assembly may not be activated normally unless the separate type front seatback cover is securely installed.
  
  Check that the strap is not twisted after installing the bracket.
  
  Install the bracket securely.
INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY
1. Engage the 2 guides as shown in the illustration.
2. Engage the 14 claws.
3. Install the front seatback board sub-assembly with the 2 screws.
INSTALL FRONT SEAT ASSEMBLY

Click here