CLOCK SYSTEM SYSTEM DESCRIPTION


  1. ACCESSORY METER ASSEMBLY


    1. Warning or Indicator

      Item Detail
      Front passenger side seat belt warning light Receives a front passenger side seat belt warning light signal from the combination meter assembly.
      AWD warning light*1 Receives an AWD warning light signal from the combination meter assembly.
      Slip indicator light Receives a slip indicator light signal from the combination meter assembly.
      VSC OFF indicator light Receives a VSC OFF indicator light signal from the combination meter assembly.
      EPS warning light Receives an EPS warning light signal from the combination meter assembly.
      TRC OFF indicator light Receives a TRC OFF indicator light signal from the combination meter assembly.
      Security indicator light Receives a security indicator light signal from the transponder key amplifier*2 or certification ECU (smart key ECU assembly)*3.
      Passenger airbag ON/OFF indicator light Receives a passenger airbag ON/OFF indicator light signal from the center airbag sensor assembly.
      MIL (Check engine warning light) Receives a MIL (check engine warning light) signal from the ECM.

      • *1: for AWD

      • *2: w/o Smart Entry and Start System

      • *3: w/ Smart Entry and Start System

    2. Multi-information Display

      Item Detail
      Cruise information display Average fuel consumption Six types of information (average fuel consumption, average vehicle speed, driving time, current fuel consumption, and driving range) can be displayed.
      Average vehicle speed
      Driving time
      Current fuel consumption
      Driving range
      Multi-information display Each system warning Interrupts the multi-information display immediately when a warning occurs.
      DTC (Diagnostic Trouble Code) display Displays 2 digit DTCs pertaining to the VSC function.
      Custom setting display Displays the customized setting of each item.
      Outside temperature Displays the outside temperature.
      Adjustment display Press SETUP switch in the drive monitor switch to enter the clock adjustment and display adjustment modes.
      Illumination control Displays the current illumination level and adjust the combination meter assembly brightness.
      ODO/TRIP meter Indicates the driving distance.