DESCRIPTION
The side collision sensor RH circuit (to determine deployment of the front seat side airbag assembly RH and curtain shield airbag assembly RH) is composed of the center airbag sensor assembly, rear airbag sensor RH and side airbag sensor RH.
The side airbag sensor RH detect impacts to the vehicle and send signals to the center airbag sensor assembly to determine if the airbag should be deployed.
DTC B1690/15 is stored when a malfunction is detected in the side airbag sensor RH.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1690/15 |
|
|
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
CHECK SIDE AIRBAG SENSOR RH
| *1 | Side Airbag Sensor LH |
| *2 | Rear Airbag Sensor RH |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the side airbag sensor LH with RH and connect the connectors.
Connect the cable to the negative (-) battery terminal.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Clear the DTCs stored in memory Click here.
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs Click here.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Tech Tips
Codes other than DTCs B1690/15 and B1695/16 may be output at this time, but they are not related to this check.
| B |
|
REPLACE SIDE AIRBAG SENSOR RH Click here |
| C |
|
USE SIMULATION METHOD TO CHECK Click here |
| A |
|
REPLACE CENTER AIRBAG SENSOR ASSEMBLY Click here