BACK DOOR COURTESY SWITCH INSPECTION


  1. INSPECT BACK DOOR COURTESY SWITCH (BACK DOOR LOCK ASSEMBLY)


    1. Measure the resistance according to the value(s) in the table below.

      A01EJSTE01
      Standard Resistance
      Tester Connection Condition Specified Condition
      3 (CTY) - 4 (E) Open-latched Below 1 Ω
      3 (CTY) - 4 (E) Half-latched Below 1 Ω
      3 (CTY) - 4 (E) Full-latched 10 kΩ or higher
      3 (CTY) - 4 (E) Over-latched 10 kΩ or higher

      If the result is not specified, replace the back door lock assembly.