IGNITION KEY CYLINDER LIGHT INSTALLATION


  1. INSTALL TRANSPONDER KEY AMPLIFIER


    1. A01EKOW

      Connect the connector to the transponder key amplifier.

    2. A01EIR2

      Engage the 2 claws and install the transponder key amplifier.

  2. INSTALL UPPER STEERING COLUMN COVER


    1. A01EK5A

      Engage the 4 clips and 2 guides to install the upper steering column cover onto the instrument panel cluster finish panel.

    2. A01EJEM

      Engage the claw to install the upper steering column cover.

  3. INSTALL LOWER STEERING COLUMN COVER


    1. A01EKV0

      Engage the 2 claws to install the lower steering column cover.

    2. Install the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  4. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EJS4

      Connect the hood lock control cable.

    2. A01EITG

      Connect the aspirator duct and connector.

    3. A01EKDA

      Connect the connectors.

    4. Engage the claw and 9 clips.

    5. Install the lower No. 1 instrument panel finish panel with the bolt <C> and screw <E> or <F>.

  5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY


    1. A01EJEA

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  6. INSTALL FRONT DOOR SCUFF PLATE


    1. A01ELE9

      Engage the guide, 3 clips and the 7 claws to install the front door scuff plate LH.