IGNITION KEY CYLINDER LIGHT REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE


    1. A01ELE9

      Disengage the 3 clips, 7 claws and guide, and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY


    1. A01EJEA

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A01EKDA

      Remove the bolt <C> and screw <E> or <F>.

    2. Disengage the claw and 9 clips.

    3. Disconnect the connectors.

    4. A01EITG

      Disconnect the connector and aspirator duct.

    5. A01EJS4

      Disconnect the hood lock control cable and remove the lower No. 1 instrument panel finish panel.

  4. REMOVE LOWER STEERING COLUMN COVER


    1. A01EKV0

      Remove the 2 screws.

    2. Push the right and left sides of the lower steering column cover, and disengage the 2 claws to remove the lower steering column cover.

  5. REMOVE UPPER STEERING COLUMN COVER


    1. A01EJEM

      Disengage the claw.

    2. A01EK5A

      Disengage the 4 clips and 2 guides to remove the upper steering column cover.

  6. REMOVE TRANSPONDER KEY AMPLIFIER


    1. A01EK12

      Disengage the 2 claws and disconnect the transponder key amplifier as shown in the illustration.

    2. A01EKOW

      Disconnect the connector and remove the transponder key amplifier.