LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH GTS

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Customize Setting / Illuminated Entry.

    5. Select the setting by referring to the table below.

      Illuminated Entry
      Tester Display Default Contents Setting
      Lighting Time 15 s Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON.) 15 s, 7.5 s or 30 s
      I/L when ACC OFF ON Lights up the transponder key amplifier*1, roof console box assembly, step or spot light assembly and engine switch illumination*2 when the ignition switch is turned from ACC or ON to off. ON or OFF
      I/L ON W/Door Key Unlock ON Lights up the transponder key amplifier*1, roof console box assembly, step or spot light assembly and engine switch illumination*2 when doors are unlocked using a mechanical key or door control transmitter. ON or OFF
      Room Light when Aprchd*2 ON Lights up the roof console box assembly, step or spot light assembly and engine switch illumination when the key enters any actuation area around the doors. ON or OFF
      Interior Light Control ON Lights up the transponder key amplifier*1, roof console box assembly, step or spot light assembly and engine switch illumination*2 when the illuminated entry function is operating. ON or OFF

      Tech Tips


      • *1: w/o Smart Entry and Start System

      • *2: w/ Smart Entry and Start System