ENGINE HOOD COURTESY SWITCH REMOVAL


  1. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01ELBH

      Using a clip remover, remove the 12 clips and cool air intake duct seal.

  2. REMOVE RADIATOR GRILLE


    1. A01EM2EE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille.

    2. A01EKM4

      Remove the 2 bolts.

    3. A01EL50

      Using a clip remover, remove the 3 clips.

    4. Disengage the 6 claws and remove the radiator grille.

  3. REMOVE LOW PITCHED HORN ASSEMBLY


    1. A01EIRH

      Disconnect the connector.

    2. Remove the bolt and low pitched horn assembly.

  4. REMOVE SECURITY COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. A01EKK2E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01EJFG

      Disconnect the connector.

    3. Remove the 3 bolts.

    4. A01EJH5

      Disconnect the hood lock control cable and remove the hood lock assembly.