ELECTRICAL KEY OSCILLATOR (for Rear Floor) REMOVAL


  1. REMOVE TONNEAU COVER ASSEMBLY


    1. Remove the tonneau cover assembly.

  2. REMOVE DECK BOARD ASSEMBLY


    1. A01EL2J

      Disengage the 2 guides and remove the deck board assembly.

  3. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A01EINV

      Disengage the 2 guides and remove the No. 3 deck board sub-assembly.

  4. REMOVE DECK SIDE TRIM BOX LH


    1. A01ELW2

      Remove the 3 clips and remove the deck side trim box LH.

  5. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A01EMLZ

      Disengage the 2 guides and remove the No. 2 deck board sub-assembly.

  6. REMOVE DECK SIDE TRIM BOX RH


    1. A01EIQE

      Remove the 4 clips and remove the deck side trim box RH.

  7. REMOVE NO. 1 DECK BOARD


    1. A01EK32

      Disengage the 6 clips and remove the No. 1 deck board.

  8. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY


    1. A01ELM5

      Disengage the 2 claws, 2 guides and 5 clips, and remove the rear seat sub floor panel assembly.

  9. REMOVE ELECTRICAL KEY OSCILLATOR


    1. A01EKW5

      Disconnect the connector.

    2. Disengage the clamp and remove the electrical key oscillator.

      Note

      Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.