ELECTRICAL KEY OSCILLATOR (for Center Floor) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  3. REMOVE REAR SEAT INNER TRACK BRACKET COVER


    1. A01EM8W

      Disengage the 3 claws and guide, and remove the rear seat inner track bracket cover as shown in the illustration.

  4. REMOVE REAR SEAT OUTER TRACK BRACKET COVER


    1. A01EKLF

      Disengage the 3 claws and guide, and remove the rear seat outer track bracket cover as shown in the illustration.

  5. DISCONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY


    1. Pull down the adjuster's lock piece to release the lock as shown in the illustration.

      A01EJOCE01
      Text in Illustration
      *1 Adjuster Spring *2 Lock Piece
    2. A01EKXEE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.

    3. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

      A01EK6GE01
      Text in Illustration
      *1 Protective Tape *2 Seat Track Adjusting Handle

    4. Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable sub-assembly as shown in the illustration.

      A01ELATE01
      Text in Illustration
      *1 Protective Tape - -

  6. REMOVE REAR SEAT ASSEMBLY


    1. A01EMPM

      Remove the 3 bolts on the rear side of the seat.

    2. A01EMC9

      Remove the 2 bolts on the front side of the rear seat assembly RH.

    3. Remove the rear seat assembly RH.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE ELECTRICAL KEY OSCILLATOR


    1. A01EK6P

      Disconnect the connector.

    2. Disengage the clamp and the electrical key oscillator.

      Note

      Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.