THEFT DETERRENT SYSTEM (w/o Smart Entry and Start System) DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Key Unlock Warning SW Unlock warning switch signal/ON or OFF

      ON: Key inserted in the ignition key cylinder

      OFF: Key removed from the ignition key cylinder

      		 -
      ACC SW Ignition switch ACC signal/ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 -
      IG SW Ignition switch signal/ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch off

      		 -
      D Door Courtesy SW D door courtesy switch/ON or OFF

      ON: Driver side door open

      OFF: Driver side door closed

      		 -
      P Door Courtesy SW P door courtesy switch/ON or OFF

      ON: Front passenger side door open

      OFF: Front passenger side door closed

      		 -
      RR Door Courtesy SW Rear right door courtesy switch/ON or OFF

      ON: Rear right door open

      OFF: Rear right door closed

      		 -
      RL Door Courtesy SW Rear left door courtesy switch/ON or OFF

      ON: Rear left door open

      OFF: Rear left door closed

      		 -
      Back Door Courtesy SW Back door courtesy switch/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      D-Door Lock Pos SW Driver's door lock position switch/ON or OFF

      ON: Driver door unlocked

      OFF: Driver door locked

      		 -
      P-Door Lock Pos SW Passenger door lock position switch/ON or OFF

      ON: Passenger door unlocked

      OFF: Passenger door locked

      		 -
      Back Door Open Back door lock / Permit or Prohibit

      Permit: Back door unlocked

      Prohibit: Back door locked

      		 -
      RR-Door Lock Pos SW Rear right door lock position switch/ON or OFF

      ON: Rear right door unlocked

      OFF: Rear right door locked

      		 -
      RL-Door Lock Pos SW Rear left door lock position switch/ON or OFF

      ON: Rear left door unlocked

      OFF: Rear left door locked

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Hazard Hazard warning lights ON / OFF -
      Vehicle Horn Vehicle horns ON / OFF -
      Security Indicator Security indicator ON / OFF -
      Security Horn Security horn ON / OFF -