FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK ASSEMBLY LH


    1. Check the operation of the door lock motor.


      1. A01EJ51E29
        Text in Illustration
        *1

        Component without harness connected

        (Front Door Lock Assembly LH)
        *2 Unlock
        *3 Lock

        Apply battery voltage and check the operation of the door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 4 (L)

        Battery negative (-) → Terminal 1 (UL)

        		 Locks

        Battery positive (+) → Terminal 1 (UL)

        Battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the front door lock assembly LH.

    2. Check the operation of the door unlock detection switch.


      1. A01EJ51E12
        Text in Illustration
        *1

        Component without harness connected

        (Front Door Lock Assembly LH)
        *2 Unlock
        *3 Lock

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        7 (E) - 8 (LSSR) Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

    3. Check the operation of the door key lock and unlock switch.


      1. A01EIPUE17
        Text in Illustration
        *1

        Component without harness connected

        (Front Door Lock Assembly LH)
        *2 Lock
        *3 Unlock

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 9 (L) Locked Below 1 Ω
        7 (E) - 9 (L) Free 10 kΩ or higher
        7 (E) - 10 (UL) Unlocked Below 1 Ω
        7 (E) - 10 (UL) Free 10 kΩ or higher

        If the result is not as specified, replace the front door lock assembly LH.

  2. INSPECT FRONT DOOR LOCK ASSEMBLY RH


    1. Check the operation of the door lock motor.


      1. A01EJTLE30
        Text in Illustration
        *1

        Component without harness connected

        (Front Door Lock Assembly RH)
        *2 Unlock
        *3 Lock

        Apply battery voltage and check the operation of the door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 4 (L)

        Battery negative (-) → Terminal 1 (UL)

        		 Locks

        Battery positive (+) → Terminal 1 (UL)

        Battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the front door lock assembly RH.

    2. Check the operation of the door unlock detection switch.


      1. A01EJTLE14
        Text in Illustration
        *1

        Component without harness connected

        (Front Door Lock Assembly RH)
        *2 Unlock
        *3 Lock

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.