DOOR CONTROL TRANSMITTER (w/ Smart Entry and Start System) INSTALLATION


  1. INSTALL TRANSMITTER BATTERY


    1. for Type A:


      1. A01EJ84

        Install a new battery with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A01EIP3

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      3. A01EL9U

        Insert the mechanical key into the transmitter.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.

    2. for Type B:


      1. A01EJAM

        Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A01EMPI

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      3. A01EKEK

        Insert the mechanical key into the transmitter.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.